Readme.4D03

This is the readme file for D03 platform

After you executed

1	./estuary/build.sh --file=./estuary/estuarycfg.json --builddir=./workspace

for D03, all targets files will be produced. they are:

UEFI_D03.fd

description: UEFI_D03.fd is the UEFI bios for D03 platform.
target: <project root>/workspace/binary/D03/UEFI_D03.fd
source: <project root>/uefi

build commands(supposedly, you are in <project root> currently):

1	./estuary/submodules/build-uefi.sh --platform=D03 --output=workspace

grubaa64.efi

description: grubaa64.efi is used to load kernel image and dtb files from SATA, SAS, USB Disk, or NFS into RAM and start the kernel.
target: <project root>/workspace/binary/arm64/grubaa64.efi
source: <project root>/grub

build commands(supposedly, you are in <project root> currently):

1	./estuary/submodules/build-grub.sh --output=./workspace

if your host is not arm architecture, please execute

1	./estuary/submodules/build-grub.sh --output=./workspace --cross=aarch64-linux-gnu-

Note: more details about how to install gcc-linaro-aarch64-linux-gnu-4.9-2014.09_linux, please refer to https://github.com/open-estuary/estuary/blob/master/doc/Toolchains_Guide.4All.md.

Image & hip06-d03.dtb

descriptions: Image is the kernel executable program, and hip06-d03.dtb is the device tree binary.
target:
Image in <project root>/workspace/binary/arm64/Image
hip06-d03.dtb in <project root>/workspace/binary/D03/hip06-d03.dtb
source: <project root>/kernel

build commands(supposedly, you are in <project root> currently):

1	./estuary/submodules/build-kernel.sh --platform=D03 --output=workspace

if your host is not arm architecture, please execute

1	./estuary/submodules/build-kernel.sh --platform=D03 --output=workspace --cross=aarch64-linux-gnu-

Note: more details about how to install gcc-linaro-aarch64-linux-gnu-4.9-2014.09_linux, please refer to https://github.com/open-estuary/estuary/blob/master/doc/Toolchains_Guide.4All.md.

More detail about distributions, please refer to Distributions_Guide.md.

More detail about toolchains, please refer to Toolchains_Guide.md.

More detail about how to deploy target system into D03 board, please refer to Deployment_Manual.md.

More detail about how to debug, analyse, diagnose system, please refer to Armor_Manual.md.

More detail about how to benchmark system, please refer to Caliper_Manual.md.

More detail about how to access remote boards in OpenLab, please refer to Boards_in_OpenLab.